STRATOGEL 3D

STRATOGEL 3D is designed to separate an orthodontic acrylic resin such as TECHNO SIN or TECHNO SIN Tixo from a model printed with 3D resin. The correct separation with other types of resins is not guaranteed, in which case a test should be carried out.

• Creates a very thin separation layer of 12 microns

• Does not contaminate the 3D resin or acrylic

• Easily removed with water

Formats
3280-100
Add to Wishlist
Description

Despite its viscosity, the gel easily spreads over the surface and when dry creates a thin plastic layer. STRATOGEL acts as a separation sheet between the 3D resin model and the acrylic resin.

The product is supplied with the correct viscosity to be effective with a single layer, however, a second layer can be applied on top of the first in the case of rougher surfaces (printing models of more than 100 microns resolution). The first layer must be completely dry.

Once dry, it remains adhered to the acrylic resin and the 3D resin model is completely clean. The plastic layer is easily removed with water and a brush.

STRATOGEL 3D leaves no residue, does not attack the acrylic resin or the 3D resin model, and does not alter its properties. It does not contain any toxic elements.


DOWNLOAD

  Product card

 Working instructions

 Safety data sheet
Product Details
3280-100
  • ISO  9001 , ISO 13485
    ISO 9001 , ISO 13485
  • Pre-sale and after-sale service All installation, use and maintenance information available.
    Pre-sale and after-sale service All installation, use and maintenance information available.
  • Satisfaction guaranteed If you are not satisfied, you have 15 days to
change your mind.
    Satisfaction guaranteed If you are not satisfied, you have 15 days to change your mind.

Sign in

 

My Wishlist0