Home

Universal phosphate bound investment for crown and bridges. Normal or rapid burnout technique. Liquid: EXPANSOR. ISO 15912:2016 TYPE: 1; CLASS: 2

STRATOGEL 3D is designed to separate an orthodontic acrylic resin such as TECHNO SIN or TECHNO SIN Tixo from a model printed with 3D resin. The correct separation with other types of resins is not guaranteed, in which case a test should be carried out.

• Creates a very thin separation layer of 12 microns

• Does not contaminate the 3D resin or acrylic

• Easily removed with water

SEPARATING AGENT PLASTER-PLASTER.

Effective separation of the plaster components without film formation between them.

Precision thin phosphatic coating, for  casting technique Cr-Co and combined implant applications, for fast or conventional heating.

Polisili. Investment made of polysilicates and alcohol, special for chrome cobalt castings on models.

TYPE 2 CLASS 1 • ISO 15912

3D printing resin for printing biocompatible surgical guides. Class 1. 405 nm. 385 nm.

Contact for MORE INFORMATION

      

3D printing resin for printing removable gum models. 405 nm. 

Contact for MORE INFORMATION

      

CONSULT

FAST AND SAFE SETTING OF 3D RESINS

Pouring flask for silicone / gel.

Material for blasting - Pearls. Leadless

Pumice powder. Fine grain.

Liquid for electrolytic polishing of Cr-Co metal structures.

Polishing paste for all Cobalt-Chromium and Ni-Cr alloys. Green.

Polishing paste for all semiprecious alloys and gold.

Pre-polishing gel for acrylic work. Pumice substitute.

Polishing paste for precious alloys and resins.

Non-precious alloy for metal-to-ceramic work or acrylic veneering. Beryllium free.

Shore 90. Kneadable silicone for laboratory. Polycondensation.

Retardant liquid to increase setting time of gypsum.

Silicone based gingival mask for the reproduction of soft tissue contours.

Photo-polymerisable curing resin gel, for reparing works. Pink.

Rubber polishers for Chrome Cobalt and hard alloys.

Phosphate-base investment for crown and bridges, special for a rapid o normal burnout technique. Liquid EXPANSOR-B. ISO 15912:2016 TYPE: 1, CLASS: 2

Photo-polymerisable resin for making individual trays and base plates. Pink.

Plaster hardener.

Liquid to reduce the setting time of gypsum.

Separating fluid for acrylic resins.

Liquid lacquer for Cad/Cam scanning.

Strong gypsum and alginate removing liquid.

Chromatic (orange > red) lacquer for painting stumps, 7μ /layer.

Tension-reducing fluid for alginate and silicone. (Gypsum or investments) models without porosity.

Lacquer for stumps with assorted thickness from 5 to 13 Microns.

Separating TECHNOSIL concentrate fluid for acrylic resins.

Marking contact paint (3 μ) for identification of flaws in crowns, inlays and rubbing points.

Super fine spray for making contact points visible. Easy to remove. CFC free.

Separating fluid gypsum-wax. No film in the surface. No alcohol contents, water soluble.

Duplicating material based on Agar-Agar, reversible.

Duplicating material based on Agar-Agar, with high hardness specially for the production by pouring technique.

Shore 18. Duplicating silicone, two components, for precision duplicates.

Shore 22. Duplicating silicone, two components, for precision duplicates.

Shore 80. Kneadable silicone for laboratory. Polycondensation.

Catalyst. 

Kneadable silicone for laboratory. Polycondensation.

Shore 85. Addition lab putty silicone.

Sticky wax, for fixing of break repairs, teeth, front walls and soldering models.

Preformed wax palatines.

Sheets of calibrated modeling wax. Green.

Sheets of wax for preparation. Red.

Calibrated stippled wax for palate modelling. Green.

Retention wax grids for modeling. Red.

Wax perforated retentions.Red.

Wax for blocking out undercut points in frame work technique.

Semihard wax for modelling crowns, bridges and inlays.

Wax clasps patterns. Provided in 20 units sheet.

Sticky soft wax for positioning of wax pontics. It adheres and dries without shrinking.  Yellow.

Sculpturing wax for crowns and bridges tecnique.

Special wax for precise modelling of the cervical margins of crowns and inlays.

Surface tension-reducing agent for wax patterns.

Universal expander liquid for all PROTECHNO phosphates investments.

Universal expander liquid for all PROTECHNO phosphates investments.

Wax for blocking out in the crown and bridge technique.

Elastic dipping wax.

Distortion free, first layer on inlays or part crowns.

Wax wire, round on rolls for sprues. Normal (blue) and Hard (green).

Special wax for the milling and paring technique.

Ready-made wax parts for ceramic use. Without collar and ultra-light design.

Bite wax, sticks.

Phosphate-based precision investment for casting techniques of Cr-Co on model and combined work.
ISO 15912:2016 TYPE: 2; CLASS: 1

Casting sprues with reservoir (ball-shape).

ISO 15912:2016 TYPE: 2; CLASS: 1

NEW FORMULA

Fine investment material for partial denture technique. 

Conventional phosphate-based precision investment for Cr.Co. Casting.
ISO 15912:2016 TYPE: 2; CLASS: 1

Investment for soldering. ISO 15912:2016 TYPE: 3

Low-fusion investment special for casting of noble alloys in crown and bridge technique. 
ISO 15912:2016 TYPE: 1, CLASS: 1

Casting ring liner (asbestos free).

CoCr. porcelain bonding alloy for crowns and bridges.

Denture material for total and partial prostheses. Microwave.
CE 1639  ISO 20795-1 TYPE: 5

Denture material for total and partial prostheses. Hot curing.
CE 1639  ISO 20795-1 TYPE: 1, CLASS: 1

Denture repair and reline material. Self curing.
CE 1639  ISO 20795-1 TYPE: 2, CLASS: 1

Denture material for total and partial prostheses by pouring technique. Self-curing.
CE 1639  ISO 20795-1 TYPE: 2, CLASS: 2

Colouring system for acrylic resins, based on MMA coloured concentrates.

Orthodontic resin. Self curing.
CE 1639  ISO 20795-1 TYPE: 1

Self-polymerisable modelling resin for crowns and bridges.

Fibred veins. Red.

Self-polymerisable resin for making individual trays and base plates.

Photo-polymerisable resin for making individual trays and base plates.

Special investment for pressable ceramics. Rapid or standard burnout technique Liquid:EXPANSOR-B. ISO 15912:2016 TYPE: 1; CLASS: 2

Mixing cups for gypsum & investments.

Laboratory stone cutting saw. Quick, precise and accurate cut.

Precision Die System, one-pour technique, precise seating of dies for improved stability.

Duplicating aluminium flask.

Casting cone for duplicates.

Stick wax special for boxing of impression trays and for mounting teeth in removable prosthesis.

Duplicating flask for duplicating silicones.

Dimensions: 85x65x40 mm

Separating discs for precious & non precious metals.

Slim discs for ceramic and precious metals.

Roughing discs for Cr-Co.

Cutting disc for Cr-Co, precious & non precious metals.

Abrasive mounted points for grinding of Chrome-Cobalt and Chrome-Nickel alloys. Rapid deburring and optimum durability. 

Silicone polishers for acrylic materials.